RIDGID NaviTrack 10 Manual del operador Pagina 16

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 20
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 15
14
www.navitrack.com Ridge Tool Company ● Elyria, Ohio ● U.S.A
NaviTrack Brick Line Transmitter
Transportation and Storage
To avoid tangled cords, wrap the cords back around
the ends of the Brick when storing, lead end last, and
secure the ends under the prongs provided on the
transmitter.
Before transporting make sure that the unit is turned
OFF to preserve battery power.
Also make sure that the NaviTrack Brick line
transmitter is secure and does not bounce around or
get bumped by loose equipment.
CAUTION
Always remove batteries entirely before
shipping the NaviTrack Brick.
The NaviTrack Brick line transmitter should be stored
in a cool dry place.
Note: If storing the NaviTrack Brick line transmitter
for an extended period of time, the batteries should
be removed.
Maintenance and Cleaning
1. Keep the NaviTrack Brick line transmitter
clean with a damp cloth and some mild
detergent. Do not immerse in water.
2. When cleaning, do not use scraping tools or
abrasives as they may permanently scratch
the display. NEVER USE SOLVENTS to clean
any part of the system. Substances like
acetone and other harsh chemicals can cause
cracking of the case.
Locating Faulty Components
For troubleshooting suggestions, please refer to the
trouble shooting guide at the end of the manual. If
necessary, contact NaviTrack Technical Service at
866-733-5832.
Service and Repair
Tool should be taken to a RIDGID Independent
Authorized Service Center or returned to the factory.
All repairs made by Ridge service facilities are
warranted against defects in material and
workmanship.
If you have any questions regarding the service or
repair of this machine, call or write to:
Ridge Tool Company
Technical Service Department
400 Clark Street
Elyria, Ohio 44035-6001
Tel: (800) 519-3456
E-mail:
TechServices@ridgid.com
For the name and address of your nearest
Independent Authorized Service Center, contact the
Ridge Tool Company at (800) 519-3456 or
http://www.ridgid.com.
Vista de pagina 15
1 2 ... 11 12 13 14 15 16 17 18 19 20

Comentarios a estos manuales

Sin comentarios