
4
SPECIFIC SAFETY RULES
n Never direct a water stream toward people or pets,
or any electrical device.
n close doors
and windows. Clear the area to be cleaned of debris,
toys, outdoor furniture, or other objects that could create
a hazard.
n
running.
n Never start the machine if ice has formed in any part
of the equipment.
n
in this product. These products can cause physical
injuries to the operator and irreversible damage to the
machine.
n Always operate the machine on a level surface. If the
engine is on an incline, it could seize due to improper
lubrication (even at the maximum lubricant level).
n
The jet must not be directed at
persons, animals, electrical devices, or the machine
itself.
nNever attempt to make any adjustments while the
engine (motor) is running (except where specifically
recommended by the manufacturer).
n Protective covers must always cover rotating parts
when the engine is running.
nKeep cooling air intake (recoil starter area) and muffler
side of the engine at least 3 feet away from buildings,
obstructions, and other burnable objects.
n
hazardous materials.
nKeep away from hot parts. The muffler and other engine
parts become very hot; use caution.
nwhen
starting and operating the engine.
n Check fuel hoses and joints for looseness and fuel
leakage before each use.
n for looseness before each use.
A loose bolt or nut may cause serious engine prob-
lems.
nAlways refuel outdoors. Never refuel indoors or in a
poorly ventilated area.
nNever store the machine with fuel in the fuel tank
where ignition sources are present,
such as hot water and space heaters, clothes dryers,
and the like.
nI
n handle fuel
with care. It is highly flammable.
n Do not smoke while handling fuel.
nANever remove the
cap of the fuel tank or add fuel while the engine is running
or when the engine is hot.
n Loosen fuel cap slowly to release pressure and to keep
fuel from escaping around the cap.
nReplace all fuel tank and container caps securely.
n Wipe spilled fuel from the unit. Move 30 feet away from
refueling site before starting engine.
nIf fuel is spilled, do not attempt to start the engine but
move the machine away from the area of spillage and
avoid creating any source of ignition until fuel vapors
have dissipated.
n
circumstances.
n Before storing, allow the engine to cool.
nStore fuel in a cool, well-ventilated area, safely away
from spark and/or flame-producing equipment.
nStore fuel in containers specifically designed for this
purpose.
n Empty fuel tank and restrain the unit from moving
before transporting in a vehicle.
nWhen servicing use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage.
nONLY use cold water.
nMake sure minimum clearance of 3 feet is maintained
from combustible materials.
nNever spray close to the surface to be cleaned as you
can damage the surface.
nDo not use the spring clip for support of human
nSave these instructions. Refer to them frequently and
use them to instruct other users. If you loan someone this
tool, loan them these instructions also.
Comentarios a estos manuales